Review

Best Adhesive For Car Emblems – Top 5 Emblem Glues On The Market Today

Car emblems are cool to look at, aren’t they? A few even become identity and conversation starters. 

Since they are on the exterior though, they are quite vulnerable. Emblems have to endure harsh weather conditions, pollution, car washes, etc. After a point, they may succumb to these pressure points and fall off. If that’s the situation you are in right now, you will find this article mighty helpful.

Should You Buy a New Emblem Or Reattach The Old One?

It is personal choice, really. Choosing a new emblem is more expensive but if your old one is aging and does not have the same spark, an upgrade is always a good idea. 

But, if you would like to hang on to the old one, that’s fine too. You can also glue it back yourself! So it can be a fun project. Also, many of us get attached to old things. If there’s a way to keep them, why not go for it?

Best Adhesive For Car Emblems – Editor’s Choice

To put your car emblem back in its place, all you need is a good quality, powerful glue. 3M is our first pick in this regard. The brand has established itself as an undeniable leader with so many excellent products. Some of them have made it to our list. Let’s take a look.

1. 3M Plastic And Emblem Adhesive – 08061

Formulated specifically for rigid plastic, metal emblems, plastic emblems, upholstery, vinyl side moldings, and tail light lenses, this 3M adhesive has the following features:

  • 3M Plastic And Emblem Adhesive - 08061It has strong adhesion properties that make it resistant to heat and water.
  • It is a fast-acting glue. It takes only 15 minutes to set. However, to be completely cured, it will take around 24 hours.
  • The glue dries clear and forms a permanent bond.
  • This solvent-based adhesive is easy to use. Its working time is around 20 seconds.
  • Hard to applyYou can also use it to fix the trim on your vehicle.
Pros
  • Dries clear
  • Permanent bond
  • Easy to use
  • Can withstand harsh temperatures
Cons
  • Pricey
  • Can leave some residue between the emblem letters

Buy-From-Amazon


2. 3M Exterior Attachment Tape Best Adhesive For Car Emblems

Next on our list is an attachment tape from 3M that is ideal for trim, moldings, and emblems. It is strong enough for all exterior purposes and comes with the features mentioned below:

  • 3M Exterior Attachment TapeIt is a press-on tape that’s very easy to use. It is also mess and residue-free.
  • The tape is a double-sided adhesive of very high strength that can withstand extreme weather conditions as well as moisture, impact, and maintenance.
  • You will be impressed by how well it does for all narrow width applications.
  • The no-mess tape aids in reducing vibrations and noise from the emblems during operation.
  • The tape bonds immediately and does not have a long curing time.
Pros
  • Super sticky
  • Can endure snow, rain, and harsh sun
  • Permanent adhesion
Cons
  • The coating/protective layer on the sticky part can be hard to remove

Buy-From-Amazon


3. C. R. Laurence 3M 8061 CRL Clear 3M Adhesive

3M claims that the C. R. Laurence 3M 8061 adhesive is a “pro’s choice” for plastic and metal emblems. A few details about it are as follows:

  • C. R. Laurence 3M 8061 CRL Clear 3M AdhesiveIt is a perfect choice for fully cured automotive paints and interior applications.
  • It dries quickly and clearly within 15 minutes. It will fully cure within 24 hours.
  • The strong adhesive forms a permanent bond that can withstand various temperatures, conditions, and car washes.
  • It is resistant to heat and water.
  • You can also use the adhesive for taillight lenses, rigid parts made of plastic, trim strips, etc.
  • It is a solvent-based glue.
Pros
  • Works very well
  • Sticks quickly
Cons
  • Nothing

Buy-From-Amazon


4. 3M 08069 Press In Place Emblem Adhesive

3M usually has products for every need and preference. If you do not like the messiness of liquid glue or the ultra-stickiness of adhesive tape, you might like this press in place adhesive.

  • 3M 08069 Press In Place Emblem AdhesiveThis is a micro-replicated adhesive film.
  • It is suitable for emblems that have existing foam tape. 
  • You do not need to worry about trimming or stringing.
  • The adhesion is pressure-sensitive and very easy to apply.
  • It is completely devoid of mess and stress.
  • The adhesive creates a long-lasting, permanent bond.
Pros
  • Very sticky
  • Pressure-sensitive strips
  • Easy to use
Cons
  • Nothing

Buy-From-Amazon


5. Permatex Black Super Weatherstrip Adhesive For Car Emblems

This one’s for those who want to look at options beyond 3M! Say hello to an excellent product from Permatex that boasts of the following:

  • Permatex Black Super Weatherstrip AdhesiveIt is a professional adhesive suitable for automotive weather-stripping.
  • It has the ability to bond various materials such as emblems and gaskets.
  • The adhesive is capable of holding its own in even in extreme temperatures. 
  • It is also resistant to solvents, anti-freeze, kerosene, and gasoline.
  • It can bond metal and rubber.
Pros
  • Bonds wonderfully
  • Good value for money
  • Very strong
Cons
  • Hard to apply

Buy-From-Amazon


People Also Ask

1. What Tape Do You Use For Car Emblems?

The 3M adhesive tape is a good choice.

2. How Long Does 3M Emblem Adhesive Take To Dry?

It dries in 15 minutes and cures in 24 hours.

3. Does 3M Tape Work On Cars?

3M has specific adhesives for automobiles. You can choose them for permanent adhesion.

4. What Is The Strongest 3M Adhesive?

3M VHB is considered the strongest.

5. Is 3M Double-Sided Tape Waterproof?

Yes, it is. It is also resistant to heat.

Conclusion

Don’t rush to replace your emblem just yet. If your old one still looks good, you can reattach it with any of the adhesives we mentioned above. No matter which one you choose, remember to go through the instructions carefully and follow them so that you don’t mess it up. All the best!

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button
Close